fsc
  • Wooden material, oak elements, planks, sawn timber, hardwood flooring
Wooden material, oak elements, planks, sawn timber, hardwood flooring

Stocklist

Qualities requirements

Furniture timber and milling cutter:

A, I (QFA) 4- sides clear
A/B , II (QF1a) 3- sides clear, in 4 plane not pull down healthy knots till 10mm
C (QF2) knots till 25mm   
br postscript to the species. This is often small end shakes till 20 mm
ABC (QFA-QF2) consists of QFA, QF1a and QF2 types according to their qualities requirements
III without knots, permitted sapwood 1/3 of thickness
IV permitted knot till 8 mm, sapwood 1/3 of thickness



Timber for floors:

Ax (QFx) face side clear, permitted sapwood 1/3 of thickness
IIx (QF1x) on face side permitted knot till 20 mm, sapwood 1/3 of thickness
IV (QF3x) on face side permitted knot max 40 mm, sapwood 1/3 of thickness
VIIs-VII (QF4-5x) on face side permitted knots over 40 mm, heart, sapwood 1/3 of thickness
VIII all qualities together and strong discoloration   
VIII-I timber for tenoning
MIKS, MIKS P all qualities together ,except VIII quality




Remains
Search:
Stock
Thickness
Width
Length
Quality
Last updated: 2020-04-01
Stock Thickness Width Length Quality Pieces m3
Dry planks 0.0270 0.1800 2.2000 VIII 19 0.2031
Dry planks 0.0270 0.1900 2.2300 Ix 9 0.1030
Dry planks 0.0270 0.1900 2.4300 Ix 6 0.0748
Dry planks 0.0270 0.1950 1.4300 Ix 7 0.0527
Dry planks 0.0270 0.1950 1.8300 Ix 14 0.1349
Dry planks 0.0270 0.2250 2.5000 KIRVARPOS 36 0.5467
Dry planks 0.0270 1.0000 2.0000 KIRVARPOS 20 1.0800
Dry planks 0.0270 1.0000 2.5000 SPL 19 1.2825
Dry planks 0.0270 12.5950 1.8500 Ix 1 0.6291
Dry planks 0.0280 0.1000 2.5000 SKROBLAS 181 1.2670
Fresh cut planks (full) 0.0260 0.1630 0.9300 Ax 258 1.0168
Fresh cut planks (full) 0.0260 0.1630 1.0000 VII S 1188 5.0347
Fresh cut planks (full) 0.0260 0.1630 1.5000 VII S 792 5.0347
Fresh cut planks (full) 0.0260 0.1630 2.0000 VII S 1584 13.4260
Fresh cut planks (full) 0.0260 0.1630 2.4500 VII S 3168 32.8933
firstprev1415161718next
Show: